This Air Ride memory unit save and recall the pump up time and the valve open time. It allow the user to save and recall individual heights of your bike. The 2 outputs can drive loads with a power of up to 350 Watt peak and 200 Watt continous. The individual height can set and store via the following procedure:
– Press the button and switch on the ignition. The pump will start immediately.
– Hold the button until your bike have the prefered height.
– Release the button and press it again until the bike is in the lowest position. That´s it.
The Air Ride Control switch on the pump the next time and recall the adjusted height when you switch on the ignition and it open the valve when you switch off the ignition. However, you can always stop the function by a press on the button. You can also control the height by a press on the button. One press activate the pump and a further press activate the valve as long as you press it.
By the way, the module can be use as normal high current button relay. Just wire the blue cable to ground and the air ride function is switched. The module works now as high current relay what is button controlled and you can use it as high power head light relay for additional lamps.